产品说明：

1.优质钢板焊接机身,均经过回火(或振动时效)、抛丸处理,刚性好,精度稳定;

2.曲轴纵置, 结构紧凑,曲轴经高频淬火后磨削处理,光洁度好,转动灵活,矩形六面加长导轨，导向面青铜镶板,导向精度高,气动双平衡缸,平衡滑块和上模重量,降低冲击和噪音,消除连杆与滑块间隙，减少受力零件冲击与磨损;

3.整机采用进口PLC集中控制,气路选用进口安全双联阀控制,可实现点动、寸动、单次和连续冲压;

4.滑块、导轨、工作台板、连杆、接套等关键件均采用树脂砂铸造,与一一般的粘土砂铸造相比，改善表面粗糙度1~2级,提高尺寸精度2~ 3级;60T及以上吨位产品采用电动调节装模高度;精品配置,关键件如气动元件、电器元件、密封件、按钮等均选用进口件;

5.可选用干式或湿式摩擦离合器,可选用液压过载保护装置或压塌式保险器;可根据用户要求选配自动润滑、光电保护、变频调速、空气吹料等装置。

1. high quality steel welding fuselage, after tempering (or vibration aging), shot blasting, good rigidity and stable accuracy.

2. crankshaft longitudinal, compact structure, crankshaft after high frequency quenching grinding treatment, good finish,

flexible rotation, rectangular six face lengthwise guide, guide surface bronze paneling, high guidance precision, The pneumatic 

double balance cylinder balances the weight of the slide block and the upper die, reduces impact and noise, eliminates the 

clearance between the connecting rod and the slide block, and reduces the force zero.Impact and wear of parts;

3. the whole machine is centralized controlled by imported PLC, and the imported gas safety valve is used to control the gas path.

4. key parts, such as slide block, guide rail, working table, connecting rod, socket and other key parts, are cast with resin

sand. Compared with a general clay sand casting, the surface roughness is improved 1~2 grade and the size accuracy is 

2~ 3.60T and above tonnage products adopt electric adjusting die height; the key parts, such as pneumatic components, 

electrical components, seals, buttons, etc., are imported.

5. the dry or wet friction clutch can be selected. The hydraulic overload protection device or the collapse type insurance 

device can be selected, and the automatic lubrication, photoelectric protection, frequency conversion speed regulation, 

air blowing and so on can be selected according to the user's requirements.